MBC-SAM9X25 Core Board
The ATMEL MBC-SAM9X25 ARM9 Board is an ARM embedded board produced by Embest, integrating the ATMEL ARM926EJ-S-based processor AT91SAM9X25, operating at 400MHz frequency, and can support WinCE and Linux. The board has 128MB DDR2 SDRAM, 256MB NandFlash, 4MB DataFlash, 64KB Serial EEPROM, 128B one-wire EEPROM.
- Hardware Features
- ARM926EJ-S™ ARM® Thumb® Processor running at up to 400 MHz @ 1.0V +/- 10%
- 16 Kbyte Data Cache, 16 Kbyte Instruction Cache, Memory Management Unit
- One 64 KByte internal ROM embedding bootstrap routine: Boot on NandFlash, SDCard, Dataflash or serial dataflash
- Programmable order
- One 32 KByte internal SRAM, single-cycle access at system speed
- External 128MB DDR2 SDRAM, 256MB NandFlash, 4MB DataFlash, 64KB Serial EEPROM，128B one-wire EEPROM
- 10/100Mbps Ethernet MAC controller(only for MBC-SAM9X25-P)
Software Features(updating)
Test routines and resources based on MDK
| Project | Description | |
| audio | Audio test | |
| nandflash | Get familiar with the Nandflash operation | |
| fatfs | Get familiar with the basic operation of file system | |
| filesystem | Base on FAT file system and Embedded file system lib implementation |
|
| datafalsh | Use SPI interface to access dataflash code efficiency. | |
| twi-eeprom | Applying the twi host to access the eeprom chip | |
| rtt | The application of the real-time/timer | |
| rtc | The application of the real-time clock | |
| twi | The application of twi with the Master and slave | |
| emac | the application of the Ethernet | |
| emac_uip_helloworld | The implementation of web-server and the telnet the device | |
| emac_uip_telnetd | The application of remote access | |
| emac_uip_webserver | The application of the web server | |
| sdmmc | The application of sdcard interface | |
| sdcard | The application of sdcard | |
| fatfs_sdcard | The application of file system and the sdcard | |
| usb_device_core | The application of USB UDPinterface | |
| usb_device_hid_transfer | The application of USB Human Interface Device class | |
| usb_device_cdc_serial | The application of USB Communication Device class | |
| usb_device_hid_keyboard | Base on the USB HIDdriver, the button test | |
| buzzer | The application of the buzzer | |
| tsensor | The application of the temperature sensor | |
| lcd | The application of the lcd | |
| touchscreen | The application of the touchscreen | |
| Button | Use the interruption to test the button |
